Kéo 2 Max - Ride at your best

The Kéo 2 Max is the product that will give you the confidence you need to go beyond your personal limits. The Look design team has completely remodeled the shape of the Kéo 2 Max, giving it a slimmed down line yet a wider contact surface, increasing its style and efficiency.

Product details of LOOK Kéo 2 Max

  • Composite pedal body

  • CrMo axle

  • Adjustable spring: 8 / 12 Nm

  • Contakt area: 500 mm²

  • Kéo Grip cleats

  • Height incl. cleats 17.3 mm

Look Kéo 2 Max with optimized Contact Surface

The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the Kéo 2 Max preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal.

The Look team also sought to optimize power transfer thanks to its new 500 mm2 of usable surface (+ 25 % increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.

Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best.

Look Kéo 2 Max with improved Spindle Profile

The spindle profile of the Kéo 2 Max has also been optimized. Built around an oversized Chromoly Plus steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.

A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.


Included in delivery: 1 pair incl. Kéo Grip cleats (grey with 4,5° angular float)
Material: pedal body: Composite
axle: Cromoly+ steel
cleat surface: stainless steel
Weight supplement: per pedal, without cleat)
approx. 328 gram (pair, with cleats and screws)
(manufacturer's specs

LOOK-PDL-004

7 kitos prekės toje pačioje kategorijoje: